How to Make Your Own Dog Mask – The Basics
In this article we’re going to examine how to make your own dog mask. We’ll cover the basics and then go on to take a look at a number of the more advanced tips and tricks which you can use.
If you have a dog that likes to bark, and especially if your dog loves to play in the garden and other areas of the house, you will need to get them some special dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the first part of the setup which will look a little scary at first, but it is actually quite simple. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not just cut a rectangular shape from the cardboard, so you will need to cut around the edge of the mask so you get something that looks like a cone. The most important thing here is to be realistic with what kind of paper plate that you’re using.
Then you will need to wrap the cardboard around the edges of the paper plate, making certain there is a good seal between the two pieces so that you can ensure that nothing will leak once you place the mask on. Be sure the edges are cut so that the edges aren’t sharp, as this may damage the edges of the mask.
Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making sure that it runs smoothly and evenly across the entire mask. You will want to start with one side of the mask first, so that you can work your way around it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it is best that you leave about one-fifth of an inch of paint on the edges so that it runs over the cardboard.
Don’t worry too much about the paint getting stuck to your mask. It’s easy to eliminate it later, and it will leave you with a wonderful finished mask to show off to everyone! It’s also a good idea to wash away any excess paint after you are done, so that you don’t wind up with smudges or smears on your dog.
Then it’s time to paste the mask onto your dog’s head. First you need to make sure that you get a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it’s secure, then you may begin to glue the mask on the dog’s face. Take the piece of cardboard that is used for the base of the mask and then fold it over. Be certain it’s quite powerful and then use your hands to ensure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds until you have the mask snugged securely onto the surface of your dog. Don’t make the folds too large or else it could look messy. Once you’ve completed this, you can then take out the mask and attach the cardboard ears. And attach the other area of the mask on the dog. Make certain the ears are level and be sure that it’s not too short or long as this will cause some problems with the mask slipping off the dog’s face.
If you’re using a dog mask as your pet security, you will need to do http://www.imperialjourney.in/finding-the-best-cheap-dog-food/ some sanding to be certain it’s safe on your dog. You can do it by sanding off any excess paper that may have been eliminated from your mask.